DMU 60 (FD) eVo 2nd Generation
For the highest demands in the 5-axis universal range of workpieces up to Ø700 x 550 mm and 500 kg on 9 m²
Max. X-axis stroke
750 mm
Max. Y-axis stroke
550 mm
Max. Z-axis stroke
550 mm
Max. workpiece diameter
700 mm
Max. workpiece height
550 mm
Max. workpiece weight
500 kg
Control & software alternatives
SIEMENS
HEIDENHAIN
Highlights
Further development of proven DMU eVo - Concept
- 28% higher rigidity and accuracy
- 40% more working area space compared to the previous machine
- Single piece hybrid machine bed made of mineral casting with 25% wider machine fixtures and 3 guideways in Y-axis
Accurate
- 4 µm double ballbar test (DBB)
- 80% higher rigidity of the Z-axis with 45 mm linear guides and optimized casting design
- High long-term thermal stability thanks to fully temperature-controlled, decoupled machine frame
Productive
- speedMASTER spindles up to 30,000 rpm or 200 Nm, 20,000 rpm with 130 Nm as standard
- High dynamics in the basic version with 50 m/min and maximum dynamics in the linear version with up to 80 m/min
- Shortest chip-to-chip time of just 4.5 seconds due to new, simultaneously opening tool changer flap
Universal
- Up to 300 tools with set-up parallel to machining time
- Optimum chip flow due to complete stainless steel covers and 60% larger opening of chip conveyor
- Ready for automation - flexible preparation makes subsequent automation much more easy
- Universal automation table top with 35 mm additional installation height in the Z direction
- Installation area of only 9 m² - whether 30, 60 or 120 tools
Application Examples
Automation
Standard automation and customised solutions in the VERTICO design
Automation is a key element of digital production. Every DMG MORI machine can be upgraded with standard automation or with a customised automation solution for flexible manufacturing systems:
PH 150
Universal pallet handling from DMG MORI
- Control directly via the machine control system
- High variability of available configurations from 24 round pallets of ø 148 to four 500 × 500 mm pallets
- Up to 150 kg workpiece weight as standard (optionally expandable to 250 kg)
- Possibility to prioritize orders
- EROWA clamping system as standard, SCHUNK optional
- High clamping repeatability (< 0.002 mm for the chuck EROWA UPC-P)
- Optimal accessibility to the machine and automation
PH Cell 500
PH Cell 500 - Modular pallet handling for up to 32 pallets
- Modular automation concept on just 10.7 m²
- Use of cast iron clamping cone pallets
- Transfer weight up to 500 kg (including pallet)
- Maximum workpiece dimensions 500x500x750 mm
- 400x400 and 500x500 mm pallets
- Modular concept with best ergonomics and accessibility
PH Cell 300
PH Cell 300 - Modular pallet handling for up to 40 pallets
- Modular automation concept with up to 40 storage locations in a 10.7 m2 footprint
- Handling of different pallet sizes in one system
- Up to 300 kg transfer weight (workpiece incl. pallet)
- Separate setup station for ergonomic and simultaneous loading and unloading of pallets
- Convenient and simple control of the automation directly via the machine control panel
PH Cell Twin
PH Cell Twin - Modular pallet handling for 2 machines and up to 30 pallets
- One pallet handling device for 2 machines
- Up to 30 pallets on 12.9 m² due to double row pallet storage on each level
- Workpieces up to 500 x 500 x 500 mm
- Up to 300 kg transfer weight (workpiece incl. pallet)
- Retrofit of the second machine possible
- Attractively priced automation in DMG MORI VERTICO design
Robo2Go Milling
Flexible workpiece handling for small to medium batch sizes
- One app for uniform control of all Robo2Go variants, setting up a new workpiece < 5 minutes
- Strong construction for all requirements: load capacity robot optionally 25 or 35 kg
- Handling of components 20 - 200 mm in size
- Full accessibility to the machine is maintained
- Alignment and turning station for automated 6-sided complete processing
Highlights
One app for uniform control of all Robo2Go variants.
- Integrated in the machine control operation via CELOS APP: No need to change your NC programs!
- Intuitive usability thanks to dialog-guided software
- Creation of the process through predefined program modules via drag & drop: No robot programming knowledge necessary
- Setting up a new workpiece < 5 minutes
Robo2Go Milling
- Strong construction for all requirements: Robot payload optionally 25 or 35 kg
- Handling of components 20 – 200 mm in size
Details
Exchangeable workpiece trays for maximum flexibility
Flexible gripper system, for workpieces up to 200 × 200 × 200 mm
MATRIS Light
Highly flexible and collaborative automation for workpieces up to 5 kg
- Freely movable workpiece handling, incl. robot and storage area on a trolley
- Workpieces up to 5 kg, or 2 × 2 kg with double gripper
- No infrastructure changes
- No safety fence necessary
- 600 × 900 mm footprint
- Collaborative robots, setup time <5 minutes
- Direct teaching without robot knowledge
- Easy connection via Ethernet
- Expansion (option)
- Storage for up to 108 workpieces (2-position storage for max. 36 workpieces as standard)
- Blow-off device
- Measuring system and quality check
WH Cell
WH Cell - Modular workpiece handling for the DMP series
- Modular automation system for workpieces up to 5.5 kg (3 kg as standard)
- Workpieces up to 300 x 200 x 100 mm
- Circulating storage system for workpieces up to 100 mm in height
- Up to 750 workpiece storage capacity
- Minimum space requirement, < 1.7 m2 for the WH 3 Cell
Highlights
DMP 35 with WH Cell
WH 3 Cell – Automation system with large storage capacity
- Handling of workpieces up to 300/200/100 (l/w/h) mm, weight up to 3 kg with double gripper, up to 5.5 kg with single gripper
- Standardized modules
- Flexible and cost-effective
- Large storage capacity for up to 750 workpieces
- Everything from one factory
- Compact, space-saving system with a footprint of 1.66 m2
MATRIS WPH
Flexible automation system for both workpiece and pallet handling
- Payload: max. 210 kg (MATRIS WPH 210)
- Handling of workpieces (W x D x H) up to 340 x 250 x 250 mm (MATRIS WPH 210)
- Handling of pallet weight up to 150 kg (MATRIS WPH 210)
- Universal handling with hand changer
(Workpiece, Hand, Pallet, Shelf) - Drawer stocker for maximized capacity
- Movable shelves for variety size of fixtures
- Guidance-based HMI controller
- Quick installation & maintenance
Highlights
High productivity and flexibility for variable-mix, variable-volume production
- Robot equipped with servo hand to handle a wide variety of workpieces:
Universal handling with hand changer (Workpiece, Hand, Pallet, Shelf) - Drawer stocker: Large stock capacity
- Pallet shelf: Movable shelves
- Pallet setup station with flat operating space:
Vacuum unit can be mounted as an option - HMI controller
- No code robot operation
- Quick recovery
- Message and Assistance
- Minimize setup time
MATRIS
Flexible modular robot system for ≥ 1 machine
- Modular concept with standardized peripheral devices, e. g. washing, measuring or marking
- 80 % shorter setup time due to modular and standardized peripherals and robot programs
- Flexible adaptation to system changes including after installation
- Simple and easy operation via the MATRIS control system without programming
Highlights
Highlights - Workpiece Handling
- Handling of workpieces up to ø 200 × 200 mm, 1 × 20 kg or 2 × 10 kg
- Stacking magazine:
- 14, 20 and 26 pallets: ø 150 × 120 mm, max. 35 kg per pallet
- 10 and 20 pallets: ø 200 × 200 mm, max. 75 kg per pallet
- Loading of oversized tooling in case of vertical machining center
- Available for 13 series, e. g. NLX, NTX, NHX, DMU, NMV, eVo, etc.
Highlights - Pallet Handling
- Ideal for the flexible production of 50 to 200 workpieces / day
- Space-saving pallet handling for up to 40 pallets
- 400 × 400 mm pallet size
- 150 kg transfer weight (workpiece and pallet)
- Integration of secondary processes such as deburring or marking possible
- Available for the CMX 50 U, CMX 70 U, DMU 50, DMU 65 monoBLOCK, CMX 600 V, CMX 800 V, CMX 1100 V
PH-AMR
Pallet automation with maximum flexibility through free layout design
- Modular concept with flexible layout design
- Driverless transport systems without guide rails or tracks
- Collaborative: Man and machine in one system
- Navigation through natural navigation
- Pallet sizes from 500 × 500 mm to 1,600 × 1,250 mm
- Workpieces up to 5,000 kg and ø 1,600 mm
Highlights
Free accessibility
- Best visibility into the workspace at any time
- Manual or crane loading still possible
- Collaborative system – man and machine in one system
Modular concept with free layout design
- No safety housing for the automation system necessary
- Free positioning possibility of the individual modules
- Subsequent integration into existing production
Simple expansion of automation system
- Additional shelf modules to increase the number of storage places
- Additional AMRs can be integrated in the system
- Machines with an automation interface can be integrated very quickly afterwards
Minimum space requirement
- Free pallet handling system without fixed installation requirements on hall floor
- AMR paths remain walkable and passable
- Laser scanners guarantee personal protection in driving direction
- Omnidirectional movement for minimum space requirements (turning circle 0m)
- Flexible automation concept - Automation of different machine types with one system
Control & Software
Fit in – B-axis Plunging
- Full utilization of the working space during internal machining of high workpieces with long tools
- Positional changes of the B axis during the turning are balanced by the X and Y axes
- The Z-axis remains at the retracted position while the B axis is moving
Highlights
Customer Benefits
Inner and outer travel of the B-axis.
- Easy programming
- Collision-free plunging in the workpiece
- Safely coming out from the workpiece after machining
MPC 2.0 – Machine Protection Control
- Vibration monitoring in the process
- Rapid shutdown in case of a crash
- Manual retraction even in swiveled machining plane
- NEW: Torque monitoring
- New: Recommended with Protection Package for CTX TC machines
Highlights
Customer Benefits
MPC Graph: current and learned process values. / MPC Diagnostics: stock condition, number of impact and crash.
- Avoiding tool breakage
- Increase in machine availability
- Damage reduction
3D quickSET
Turning
- Measurement and correction of the position of turning and Pivot axes (C4, C3, B)
- Sag compensation possible
- Can be used in combination with standard probes from customers (recommended Renishaw, Blum)
Milling
- Toolkit for checking and correcting the kinematic accuracy of 4- and 5-axis machine configuration
- All head variations and table axes
Highlights
Turning Customer Benefits
- Reliable re-calibration of the machine before a highly precise processing
- Continuous documentation of machine accuracy
- No rejected parts due to unknown Geometric-deviations
Dialogue-guided measurement of the B- and C-axis.
Milling Customer Benefits
- Periodic recalibration of the machine with comprehensive documentation
- Highest kinematic accuracy in self-regulation
Define kinematics head
TCC – Tool Control Center
- Chip detection on plan pad and tool cone
- Monitoring of pull-in force
- Cutting edge control in process by symmetry monitoring of the bending moment per cutting edge
- Visualization of the bending moment over time via Graph
Highlights
Customer Benefits
- Tool and workpiece protection
- Optimized tool process
- Monitoring of the radial and axial spindle load depending on the actual pull-in force
Left: NEW; Middle: Wear; Right: Cutting edge break
Maintenance Package i4.0
- Automatic recognition of tool pull-in force for consistently high process stability.
- Predefined cycle for automatic lubrication, every 75h or after 20,000 tool changes.
- Detection of leakage and measuring of usage of pneumatics system.
Highlights
Customer Benefits
- Efficient and timesaving lubrication without operator intervention
- High transparency by displaying the lubrication cycles and the current pull-in force.
- Data recording in combination with the optionally available Condition Analyzer for additional analyzes of air consumption and changes of the pull-in force
Detection of leakage and measuring of usage of pneumatics system.
Simple query of the monitoring parameters and the current pull-in force.
VCS Complete
- Geometric fingerprint of the machine Volumetric calibration at the touch of a button
- Detection and compensation of geometrical, positioning and angular errors of all axes
- Easy handling and implementation by the customer directly at the machine
Highlights
Customer Benefits
- Regular compensation of the machine geometry over the entire life cycle of the machine
- Dialogue-led operation for easy and fast handling
- Data recording for further analysis
Possible accuracy deviation without VCS-Complete.
Tilted Measuring Cycle
- Measuring with tilted tool axis
- Dialog-guided programming of the measuring cycles
- Positioning of the measuring points with rotary axis
Highlights
Customer Benefits
- Increase in component accuracy
- Reduction of set-up time
- Collision-free measuring thanks to tilted tool axis possible
- Further processing of the measurement results
Left : 1. circumferential measurement, 2. alignment surface, 3. alignment hole / Right : Dialog-guided programming
Grinding
Turning
- Turning, milling and grinding in one clamping
- Grinding cycles for internal, external and face grinding as well as dressing cyclesn
- Body-borne sound sensors for start-up and dressing
- Full integration of measurement module for relative and absolute LIVE-Measuring – parallel to main time
Milling
- Better surface quality through integration of the grinding technology
- Grinding cycles for internal, external and face grinding as well as dressing cycles
- Body-borne sound sensors for start-up and dressingn
- 1,300 l Cooling system with integrated centrifugal filter for The filtration of particles > 10 μ
- AKZ nozzle unit optionally available for best possible Flushing of the grinding gap
Highlights
Turning Customer Benefits
- Expansion of the technological limits of the CTX TC
- Surface accuracy < 0.4 μm
- Roundness < 5 μm
- Quality IT5 for ø > 30 mm
Left : External, internal and circular grinding. Grinding with straight / angle or cup disc. / Right : Dressing straight, angled or cup discs simply visualized.
Milling Customer Benefits
- Surface accuracy < 0.4 μ
- Roundness < 5 μ
- Quality 5 for ø < 120 mm
- Quality 4 for ø > 120 mm
Left: Spiral plane grinding or osscillating plane grinding. / Right: Longitudinal grinding.
gearSHAPING
- For straight external and internal gears with shoulder (interference contours)
- Toothing modules between 0.3 – 1.5 with quality 8 according to DIN 3961
- Up to module 2 on CTX gamma TC*
*Quality and machining time depending on tool and workpiece
Highlights
Customer benefits
- High flexibility in the production of gears, where other processes such as gear hobbing or gear skiving are not are not geometrically possible
- Clearly structured input masks for easy adjustment of the process
Left : Parametric input mask of the external gearing / Right : Parametric input mask of the internal gearing
angularTOOL
- Highest flexibility in the machining of structural components due to variable alignment of the angle head
- Automatic CAD / CAM programming
- Automatic calculation of the TCP and combination with existing control functions
Highlights
Customer Benefits
- Machining of inaccessible positions on the workpiece.
- Savings in non-productive time due to fewer tool changes
- High cost savings due to the use of fewer tools
Left : Tool driven by KSS during drilling operation / Right : Parameter mask for variable angle setting
Polygon / Oval-Milling
- Milling of oval and polygonal geometries
- Machining of excentric face polygons possible
- Simple selection of suitable machining strategies
Highlights
Customer benefits
- Simple parametric definition of the shaft-hub connection according to DIN 32711 and DIN 32712
- Enable the machining of small workpieces or those made of long-chipping materials. The perfect complement to Polygon / Oval-Turning.
Left: Selection of the machining strategy; Right: Parametric definition of the geometry on Turn-Mill and Mill-Turn machines
L-Measuring probe packet
- Measurement of webs and grooves on components
- Measurement of diameter in difficult to access places
- Available with manual and retractable Calibration unit Package content
- L-Measuring probe according to Customer-specific design
Highlights
Customer Benefits
- Flexible application possibilities
- In process measurement
Left : Semi-automatic Measurement solution. / Right : Automatic measurement solution.
gearHOBBING
- Programming of the gearing parameters via dialog input
- For spur gear, helical gear and worm gear
- Gear cutters and disk cutters can be used
- Maximized tool life by shifting of the cutter
- Achievable quality ≤ DIN 7
Highlights
Customer benefits
- Gear profile modifications easy to handle
- Use of regrinded tools
- Error prevention by monitoring (e. g. wrong axis cross angle, or wrong turning speed, or turning direction)
Left : Dialogue-supported input of all necesary gearing data. / Right : Input of the gearing paramters by single tooth or single groove milling.
Excentric turning and milling
- Superposition of the turning movement by additional X- and Y-traverses
- Applicable for turning and milling
Highlights
Customer Benefits
- Eccentric geometries easy to manufacture
- Exact axis coupling and synchronization in the background
Left : Enter the parameters for the position of the external workpiece area. / Right : Graphical representation of the position within the workpiece.
Alternating speed
- Easy to operate through three parameters and without additional sensors
- Avoiding vibrations by means adaptation of the speed
- Application for the main spindle and counter spindle, or for milling machines with FD tables with Direct Drive
Highlights
Customer Benefits
Input of parameters for speed set-point, differential speed and revolution frequency
- No manual intervention by the operator
- Identical repeatability for all components
- Increased process safety for special applications by avoiding vibrations. example, When using long thin drills or for milling parts with critical clamping
gearSKIVING 2.0
- Straight and helical external or internal spur gears and splines
- Arrow teeth with tooth offset Turn-mill machines
- Ball-shaped toothing by mathematical transformation of the 6th virtual axis
Highlights
Customer Benefits
- Internal toothing without angular head possible
- Short processing times, 10 x faster than shaping
- Synchronization and tool path controlled by the Cycle
Left : Inside gear profile machining. / Right : Outside gear profile machining.
Multitool
- Efficient use of multi-tip turning tools with more than one cutting edge on turn & mill
- Several "sister tools" on one main tool holder
Highlights
Customer Benefits
- Reduction of tool change times
- Saves tool magazine space
Interpolation turning 2.0 – turning recessing cycle
- With interpolation turning, the tool cutter follows a circular movement, where the cutter is always oriented towards the center Of the circle.
- Possible for external and internal machining
- Synchronization and tool path controlled by the cycle
- NEW: in version 2.0 complex turning contours are possible (currently only available on the DMU 50, other machine types will follow)
Highlights
Customer benefits
- Easy manufacturing of sealing surfaces where milling operation might not be possible.
- Complete component processing in one clamping possible
- Reduced investment costs for tools
Application Tuning Cycle
- Process-oriented adjustment of the feed rate n relation to the table loading
- Minimization of machining time with maximization of the component quality
- NEW: Now also available for CTX TC. Ideal machining result with the highest machine dynamics*
*without consideration of feed weight
Highlights
Customer Benefits
- User friendly setting of the machine dynamics with included DMG MORI knowhow
- Time saving in roughing
- High surface finish during finishing
Left : ATC 2.0 – Milling: Consideration of table loading. / Right : ATC – Turning: for CTX TC for easy adjustment of the machine dynamics.
DMG MORI gearMILL
- Productive complete processing
- Cost-effective gear cutting on standard machine with standard tools
- Flexible for different gear geometries
- Quality inspection in the process
Highlights
Customer Benefits
- Program creation based on blank drawings and gear data
- Optimization of workpiece orientation e.g. after heat treatment
- Interface for coordinate measuring device (Klingenberg, Leitz, Zeiss)
Left : Input of the gear parameters for the geometry calculation of a spur gear. / Right : Grafische Betrachtung des Abwälzverfahrens.
Service & Training
Downloads & Technical Data
Workpiece
Max. workpiece diameter
700 mm
Max. workpiece height
550 mm
Max. workpiece weight
500 kg
Work Area
Max. X-axis stroke
750 mm
Max. Y-axis stroke
550 mm
Max. Z-axis stroke
550 mm